34mm Diameter x 4.8mm Thick, Series 2, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated

Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle  - 132 degree,...

24mm Diameter x 4mm Thick, Series 1, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated

Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle  - 132 degree,...

2-1/16" Diameter x 5/16" Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 :...

1-9/16" Diameter x 1/4" Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 :...

34mm Diameter x 4.8mm Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 :...

2-3/64" Diameter x 5/16" Thick, Series 4, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 :...

1-17/32" Diameter x 1/4" Thick, Series 3, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 :...

1-3/8" Diameter x 3/16" Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 :...

34mm Diameter x 4.8mm Thick, Series 2, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 :...

1/2 Dia., 4 Flute., 2 LOC, Flat Shank, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

34mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated

Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle  - 132 degree

24mm Diameter x 4mm Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated

Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle  - 132 degree

34mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert TiAlN Coated

Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle  - 132 degree

24mm Diameter x 4mm Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert TiAlN Coated

Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle  - 132 degree

34mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert TiN Coated

Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle  - 132 degree