Quick view YG-1 | sku: SV825146 1-23/32" Diameter x 1/4" Thick, 3 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated MSRP: $122.12 Now: $89.15 Add to Cart Compare Quick view YG-1 | sku: SV875310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view YG-1 | sku: SV825056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view YG-1 | sku: SV875170 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view YG-1 | sku: SV820118 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view YG-1 | sku: SV870310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view YG-1 | sku: SV820056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view YG-1 | sku: SV870170 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view YG-1 | sku: SV575A00 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view YG-1 | sku: SV525320 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view YG-1 | sku: SV525256 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view YG-1 | sku: SV575560 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view YG-1 | sku: SV525138 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view YG-1 | sku: SV575310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view YG-1 | sku: SV525056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 1-23/32" Diameter x 1/4" Thick, 3 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $122.12 Now: $89.15 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected × OK
Quick view YG-1 | sku: SV875310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view YG-1 | sku: SV825056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view YG-1 | sku: SV875170 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view YG-1 | sku: SV820118 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view YG-1 | sku: SV870310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view YG-1 | sku: SV820056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view YG-1 | sku: SV870170 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view YG-1 | sku: SV575A00 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view YG-1 | sku: SV525320 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view YG-1 | sku: SV525256 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view YG-1 | sku: SV575560 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view YG-1 | sku: SV525138 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view YG-1 | sku: SV575310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view YG-1 | sku: SV525056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 1-23/32" Diameter x 1/4" Thick, 3 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $122.12 Now: $89.15 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected × OK
Quick view YG-1 | sku: SV825056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view YG-1 | sku: SV875170 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view YG-1 | sku: SV820118 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view YG-1 | sku: SV870310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view YG-1 | sku: SV820056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view YG-1 | sku: SV870170 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view YG-1 | sku: SV575A00 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view YG-1 | sku: SV525320 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view YG-1 | sku: SV525256 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view YG-1 | sku: SV575560 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view YG-1 | sku: SV525138 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view YG-1 | sku: SV575310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view YG-1 | sku: SV525056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 1-23/32" Diameter x 1/4" Thick, 3 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $122.12 Now: $89.15 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected × OK
Quick view YG-1 | sku: SV875170 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view YG-1 | sku: SV820118 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view YG-1 | sku: SV870310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view YG-1 | sku: SV820056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view YG-1 | sku: SV870170 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view YG-1 | sku: SV575A00 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view YG-1 | sku: SV525320 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view YG-1 | sku: SV525256 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view YG-1 | sku: SV575560 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view YG-1 | sku: SV525138 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view YG-1 | sku: SV575310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view YG-1 | sku: SV525056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 1-23/32" Diameter x 1/4" Thick, 3 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $122.12 Now: $89.15 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected × OK
Quick view YG-1 | sku: SV820118 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view YG-1 | sku: SV870310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view YG-1 | sku: SV820056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view YG-1 | sku: SV870170 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view YG-1 | sku: SV575A00 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view YG-1 | sku: SV525320 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view YG-1 | sku: SV525256 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view YG-1 | sku: SV575560 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view YG-1 | sku: SV525138 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view YG-1 | sku: SV575310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view YG-1 | sku: SV525056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 1-23/32" Diameter x 1/4" Thick, 3 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $122.12 Now: $89.15 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected × OK
Quick view YG-1 | sku: SV870310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view YG-1 | sku: SV820056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view YG-1 | sku: SV870170 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view YG-1 | sku: SV575A00 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view YG-1 | sku: SV525320 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view YG-1 | sku: SV525256 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view YG-1 | sku: SV575560 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view YG-1 | sku: SV525138 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view YG-1 | sku: SV575310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view YG-1 | sku: SV525056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 1-23/32" Diameter x 1/4" Thick, 3 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $122.12 Now: $89.15 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected × OK
Quick view YG-1 | sku: SV820056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view YG-1 | sku: SV870170 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view YG-1 | sku: SV575A00 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view YG-1 | sku: SV525320 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view YG-1 | sku: SV525256 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view YG-1 | sku: SV575560 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view YG-1 | sku: SV525138 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view YG-1 | sku: SV575310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view YG-1 | sku: SV525056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 1-23/32" Diameter x 1/4" Thick, 3 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $122.12 Now: $89.15 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected × OK
Quick view YG-1 | sku: SV870170 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view YG-1 | sku: SV575A00 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view YG-1 | sku: SV525320 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view YG-1 | sku: SV525256 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view YG-1 | sku: SV575560 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view YG-1 | sku: SV525138 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view YG-1 | sku: SV575310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view YG-1 | sku: SV525056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 1-23/32" Diameter x 1/4" Thick, 3 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $122.12 Now: $89.15 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected × OK
Quick view YG-1 | sku: SV575A00 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view YG-1 | sku: SV525320 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view YG-1 | sku: SV525256 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view YG-1 | sku: SV575560 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view YG-1 | sku: SV525138 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view YG-1 | sku: SV575310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view YG-1 | sku: SV525056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 1-23/32" Diameter x 1/4" Thick, 3 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $122.12 Now: $89.15 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected × OK
Quick view YG-1 | sku: SV525320 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view YG-1 | sku: SV525256 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view YG-1 | sku: SV575560 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view YG-1 | sku: SV525138 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view YG-1 | sku: SV575310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view YG-1 | sku: SV525056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 1-23/32" Diameter x 1/4" Thick, 3 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $122.12 Now: $89.15 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected × OK
Quick view YG-1 | sku: SV525256 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view YG-1 | sku: SV575560 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view YG-1 | sku: SV525138 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view YG-1 | sku: SV575310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view YG-1 | sku: SV525056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 1-23/32" Diameter x 1/4" Thick, 3 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $122.12 Now: $89.15 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected × OK
Quick view YG-1 | sku: SV575560 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view YG-1 | sku: SV525138 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view YG-1 | sku: SV575310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view YG-1 | sku: SV525056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 1-23/32" Diameter x 1/4" Thick, 3 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $122.12 Now: $89.15 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected × OK
Quick view YG-1 | sku: SV525138 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view YG-1 | sku: SV575310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view YG-1 | sku: SV525056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 1-23/32" Diameter x 1/4" Thick, 3 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $122.12 Now: $89.15 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected × OK
Quick view YG-1 | sku: SV575310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view YG-1 | sku: SV525056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 1-23/32" Diameter x 1/4" Thick, 3 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $122.12 Now: $89.15 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected × OK
Quick view YG-1 | sku: SV525056 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated MSRP: $55.29 Now: $40.36 Add to Cart Compare Quick view 1-23/32" Diameter x 1/4" Thick, 3 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $122.12 Now: $89.15 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected × OK
Quick view 1-23/32" Diameter x 1/4" Thick, 3 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $122.12 Now: $89.15 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected × OK
Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected × OK
Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected × OK
Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected × OK
Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected × OK
Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $80.36 Now: $58.66 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected × OK
Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $68.04 Now: $49.67 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected × OK
Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Carbide C5 (P40) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor general use in carbon steel and steel alloys Performs best in rigid setups Point Angle - 132 degree MSRP: $59.58 Now: $43.49 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected × OK
Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $204.94 Now: $149.61 Add to Cart Compare Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected × OK
Quick view 3-5/16" Diameter x 7/16" Thick, 6 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $172.23 Now: $125.73 Add to Cart Compare Quick view 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected × OK
Quick view 2-7/8" Diameter x 7/16" Thick, 5 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $148.51 Now: $108.41 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected × OK
Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $96.55 Now: $70.48 Add to Cart Compare Quick view 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected × OK
Quick view 1-19/32" Diameter x 1/4" Thick, 3 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $82.08 Now: $59.92 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected × OK
Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $66.00 Now: $48.18 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected × OK
Quick view 7/8" Diameter x 5/32" Thick, 1 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $55.29 Now: $40.36 Add to Cart Compare Previous 183 184 185 186 187 188 189 190 191 192 193 Next Previous 183 184 185 186 187 188 189 190 191 192 193 Next Compare Selected
