Quick view YG-1 | sku: SV125057 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV175170 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV170A00 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view YG-1 | sku: SV120310 3-5/32" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view YG-1 | sku: SV120246 2-23/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV170560 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV120118 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV170310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV120108 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV120057 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV170170 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: S09719 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view YG-1 | sku: S09505 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view YG-1 | sku: S14217 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view YG-1 | sku: S14117 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $43.46 Now: $31.73 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/32" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-23/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected × OK
Quick view YG-1 | sku: SV175170 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: SV170A00 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view YG-1 | sku: SV120310 3-5/32" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view YG-1 | sku: SV120246 2-23/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV170560 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV120118 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV170310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV120108 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV120057 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV170170 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: S09719 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view YG-1 | sku: S09505 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view YG-1 | sku: S14217 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view YG-1 | sku: S14117 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $43.46 Now: $31.73 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/32" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-23/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected × OK
Quick view YG-1 | sku: SV170A00 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view YG-1 | sku: SV120310 3-5/32" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view YG-1 | sku: SV120246 2-23/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV170560 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV120118 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV170310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV120108 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV120057 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV170170 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: S09719 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view YG-1 | sku: S09505 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view YG-1 | sku: S14217 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view YG-1 | sku: S14117 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $43.46 Now: $31.73 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/32" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-23/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected × OK
Quick view YG-1 | sku: SV120310 3-5/32" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view YG-1 | sku: SV120246 2-23/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV170560 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV120118 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV170310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV120108 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV120057 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV170170 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: S09719 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view YG-1 | sku: S09505 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view YG-1 | sku: S14217 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view YG-1 | sku: S14117 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $43.46 Now: $31.73 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/32" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-23/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected × OK
Quick view YG-1 | sku: SV120246 2-23/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view YG-1 | sku: SV170560 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV120118 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV170310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV120108 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV120057 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV170170 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: S09719 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view YG-1 | sku: S09505 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view YG-1 | sku: S14217 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view YG-1 | sku: S14117 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $43.46 Now: $31.73 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/32" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-23/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected × OK
Quick view YG-1 | sku: SV170560 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view YG-1 | sku: SV120118 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV170310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV120108 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV120057 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV170170 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: S09719 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view YG-1 | sku: S09505 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view YG-1 | sku: S14217 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view YG-1 | sku: S14117 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $43.46 Now: $31.73 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/32" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-23/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected × OK
Quick view YG-1 | sku: SV120118 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV170310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV120108 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV120057 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV170170 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: S09719 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view YG-1 | sku: S09505 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view YG-1 | sku: S14217 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view YG-1 | sku: S14117 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $43.46 Now: $31.73 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/32" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-23/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected × OK
Quick view YG-1 | sku: SV170310 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV120108 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV120057 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV170170 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: S09719 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view YG-1 | sku: S09505 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view YG-1 | sku: S14217 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view YG-1 | sku: S14117 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $43.46 Now: $31.73 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/32" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-23/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected × OK
Quick view YG-1 | sku: SV120108 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view YG-1 | sku: SV120057 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV170170 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: S09719 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view YG-1 | sku: S09505 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view YG-1 | sku: S14217 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view YG-1 | sku: S14117 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $43.46 Now: $31.73 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/32" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-23/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected × OK
Quick view YG-1 | sku: SV120057 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view YG-1 | sku: SV170170 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: S09719 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view YG-1 | sku: S09505 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view YG-1 | sku: S14217 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view YG-1 | sku: S14117 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $43.46 Now: $31.73 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/32" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-23/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected × OK
Quick view YG-1 | sku: SV170170 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view YG-1 | sku: S09719 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view YG-1 | sku: S09505 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view YG-1 | sku: S14217 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view YG-1 | sku: S14117 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $43.46 Now: $31.73 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/32" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-23/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected × OK
Quick view YG-1 | sku: S09719 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view YG-1 | sku: S09505 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view YG-1 | sku: S14217 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view YG-1 | sku: S14117 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $43.46 Now: $31.73 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/32" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-23/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected × OK
Quick view YG-1 | sku: S09505 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view YG-1 | sku: S14217 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view YG-1 | sku: S14117 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $43.46 Now: $31.73 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/32" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-23/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected × OK
Quick view YG-1 | sku: S14217 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view YG-1 | sku: S14117 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $43.46 Now: $31.73 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/32" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-23/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected × OK
Quick view YG-1 | sku: S14117 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated MSRP: $43.46 Now: $31.73 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/32" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-23/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected × OK
Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/32" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-23/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected × OK
Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/32" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-23/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected × OK
Quick view 100mm Diameter x 11.1mm Thick, 7 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $201.88 Now: $147.37 Add to Cart Compare Quick view 3-5/32" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-23/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected × OK
Quick view 3-5/32" Diameter x 7/16" Thick, 6 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $169.66 Now: $123.85 Add to Cart Compare Quick view 2-23/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected × OK
Quick view 2-23/32" Diameter x 7/16" Thick, 5 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $146.29 Now: $106.79 Add to Cart Compare Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected × OK
Quick view 56mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $95.11 Now: $69.43 Add to Cart Compare Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected × OK
Quick view 1-9/32" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected × OK
Quick view 31mm Diameter x 4.8mm Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected × OK
Quick view 1-1/8" Diameter x 3/16" Thick, 2 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $59.02 Now: $43.08 Add to Cart Compare Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected × OK
Quick view 57/64" Diameter x 5/32" Thick, 1 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $50.13 Now: $36.59 Add to Cart Compare Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected × OK
Quick view 17mm Diameter x 3.2mm Thick, 0 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $44.95 Now: $32.81 Add to Cart Compare Quick view 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected × OK
Quick view 100mm Diameter x 11.1mm Thick, Series 7, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $119.87 Now: $87.51 Add to Cart Compare Quick view 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected × OK
Quick view 2-19/32" Diameter x 7/16" Thick, Series 5, Super Cobalt (T15) Spade Drill Insert Hardslick Coated Increase wear resistance over M4 For use in medium carbon steel to high temperature alloys Performs best in rigid setups Point Angle - 132 degree, (Series 5-8 : 144 degree) MSRP: $87.83 Now: $64.12 Add to Cart Compare Quick view 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected × OK
Quick view 31mm Diameter x 4.8mm Thick, Series 2, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $51.78 Now: $37.80 Add to Cart Compare Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected × OK
Quick view 7/8" Diameter x 5/32" Thick, Series 1, Premium Cobalt (M48) Spade Drill Insert Hardslick Coated Increased tool life over T15 For use in high temperature alloys and materials including medium carbon, Alloy and tool steels Rigid set up needed Point Angle - 132 degree MSRP: $43.46 Now: $31.73 Add to Cart Compare Previous 185 186 187 188 189 190 191 192 193 194 195 Next Previous 185 186 187 188 189 190 191 192 193 194 195 Next Compare Selected
