21/32" Diameter x 1/8" Thick, Series 0, Super Cobalt (T15) Spade Drill Insert TiN Coated

Increase wear resistance over M4 For use in medium carbon steel to high temperature Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 : 144 degree) 2pcs/package

43mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert Hardslick Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

1-3/32" Diameter x 3/16" Thick, Series 2, HSS (M4) Spade Drill Insert Hardslick Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

22mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert Hardslick Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

1-23/32" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

43mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiAlN Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

22mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiAlN Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

2-13/16" Diameter x 7/16" Thick, Series 5, HSS (M4) Spade Drill Insert Hardslick Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

3-1/4" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiAlN Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

43mm Diameter x 6.4mm Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

22mm Diameter x 4mm Thick, Series 1, HSS (M4) Spade Drill Insert TiN Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

3-7/16" Diameter x 7/16" Thick, Series 6, HSS (M4) Spade Drill Insert TiN Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

1-13/32" Diameter x 1/4" Thick, Series 3, HSS (M4) Spade Drill Insert TiN Coated

General purpose insert for most materials Not recommended for tool steels and high temperature alloys High toughness for loose or manual machines Point Angle  - 132 degree, (Series 5-8 : 144...

5/8" Dia., 6 Flute., 2-5/8" LOC, 0.030" Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1/2" Dia., 6 Flute., 2" LOC, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...