3/4 Dia., 3 Flute., 1 LOC, Ball Nose, ALU-Power HPC, Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. YG-1 Alu-Power HPC...

3/8 Dia., 3 Flute., 1/2 LOC, Ball Nose, ALU-Power HPC, DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated provides...

1/2 Dia., 4 Flute., 1-1/4 LOC, Flat Shank, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1/2" Dia., 4 Flute, YG-1 X5070 High Feed Carbide End Mill, Blue Coated

  Excellent wear resistance at heavy feed rates on high hardened material. Designed with reduced clearance angles and short flutes for strength. High hardness & heat resistance coating...

3/8" Dia., 4 Flute, YG-1 X5070 High Feed Carbide End Mill, Blue Coated

  Excellent wear resistance at heavy feed rates on high hardened material. Designed with reduced clearance angles and short flutes for strength. High hardness & heat resistance coating...

5/16" Dia., 4 Flute, YG-1 X5070 High Feed Carbide End Mill, Blue Coated

  Excellent wear resistance at heavy feed rates on high hardened material. Designed with reduced clearance angles and short flutes for strength. High hardness & heat resistance coating...

1/4" Dia., 4 Flute, YG-1 X5070 High Feed Carbide End Mill, Blue Coated

  Excellent wear resistance at heavy feed rates on high hardened material. Designed with reduced clearance angles and short flutes for strength. High hardness & heat resistance coating...

3/16" Dia., 4 Flute, YG-1 X5070 High Feed Carbide End Mill, Blue Coated

  Excellent wear resistance at heavy feed rates on high hardened material. Designed with reduced clearance angles and short flutes for strength. High hardness & heat resistance coating...

1/8" Dia., 4 Flute, YG-1 X5070 High Feed Carbide End Mill, Blue Coated

  Excellent wear resistance at heavy feed rates on high hardened material. Designed with reduced clearance angles and short flutes for strength. High hardness & heat resistance coating...

3/4" Dia., 4 Flute, Stub Length, YGBasiX Carbide End Mill, X-Coated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics X-Coated for increased temperature...

20mm Dia., 38mm LOC, 102mm OAL, 4 Flute, Standard Length, YGBasiX Carbide End Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Uncoated for increased temperature and...

19/64" Dia., 4 Flute, Standard Length, YGBasiX Carbide End Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Uncoated for increased temperature and...

19/64" Dia., 4 Flute, Standard Length, YGBasiX Carbide End Mill, X-Coated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics X-Coated for increased temperature and...

17/64" Dia., 3/4" LOC, 2 Flute, Standard Length, YGBasiX Carbide End Mill, Uncoated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics Uncoated for increased temperature and...

17/64" Dia., 3/4" LOC, 2 Flute, Standard Length, YGBasiX Carbide End Mill, X-Coated

  Suitable for cutting high alloy steels, steel casting, chill casting, malleable cast iron, CrNi-steels, brass, copper, abrasive aluminums and plastics X-Coated for increased temperature and...