2-3/16" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 :...

2-5/32" Diameter x 5/16" Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 :...

5/8" Dia., 6 Flute., 1-1/4" LOC, 0.015" Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

3/4" Dia., 6 Flute., 3" LOC, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

15/32" Dia., 4 Flute., 5/8" LOC, Ball Nose, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1/8" Dia., 4 Flute., 1/8" LOC, 0.030" Corner Rad V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1/4 Dia., 4 Flute., 1/2 LOC, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1" Dia., 3 Flute., 3-1/4" LOC, 0.120" Corner Rad, ALU-Power HPC DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated Provides...

1/2" Dia., 3 Flute., 5/8" LOC, 0.120" Corner Rad, ALU-Power HPC DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated Provides...

3/4" Dia., 3 Flute., 3-1/4" LOC, 0.090" Corner Rad, ALU-Power HPC DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated Provides...

1/2" Dia., 3 Flute., 3" LOC, 0.090" Corner Rad, ALU-Power HPC DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated Provides...

1/2" Dia., 3 Flute., 2-1/2" LOC, 0.090" Corner Rad, ALU-Power HPC DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated Provides...

3/4" Dia., 3 Flute., 1-5/8" LOC, 0.030" Corner Rad, ALU-Power HPC DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated Provides...

5/8" Dia., 3 Flute., 2-1/2" LOC, 0.030" Corner Rad, ALU-Power HPC DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated Provides...

1" Dia., 3 Flute., 1-1/4" LOC, 4" OAL, 0.090" Corner Rad, ALU-Power HPC Uncoated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces. Specs D1 ...