Letter "U" YG-1 Carbide Dream Drill General, 25/64" Shank, 140° Point, 3XD, Thru Coolant, TiAlN Coated

    Drilling for Steel, Cast Steel, Cast Iron, Malleable Cast Iron Self centering and chip breaking by R-thinning Wave shape and negative land on the cutting edge for low thrust, stable...

1-13/16" Diameter x 1/4" Thick, Series 3, Carbide C5 (P40) Spade Drill Insert TiAlN Coated

Multipurpose GenometryIncrease wear resistance over M4 and T15For general use in Gray cast iron, aluminum and non-ferrousPoint Angle  - 132 degree2pcs/package

1-9/32" Diameter x 3/16" Thick, 2 Series, Flat Bottom Super Cobalt (T15) Spade Drill Insert TiN Coated

Increase wear resistance over M4For general use in carbon steel, steel alloys, stainless steel, cast iron, aluminum and non-ferrous Point Angle  - 180 degree

62mm Diameter x 7.9mm Thick, 4 Series, SM-Point Super Cobalt (T15) Spade Drill Insert TiAlN Coated

Hybrid Point - combines standard point with web thinning for improved performanceReduced thrust, improved centering and stability, increased speed and feedsFor general use in carbon steel, steel...

62mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle  - 132 degree,...

62mm Diameter x 7.9mm Thick, 4 Series, SV-Point Premium Cobalt (M48) Spade Drill Insert Hardslick Coated

Sinusoidal thinning edge for smooth cuttingPositive rake angleFor use in high temperature alloys and materials over 350-500 Brinell Performs best in rigid setups Point Angle  - 132 degree,...

62mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert H Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 :...

62mm Diameter x 7.9mm Thick, 4 Series, SV-Point Super Cobalt (T15) Spade Drill Insert Hardslick Coated

Sinusoidal thinning edge for smooth cutting Positive rake angleFor use in high nickel alloys materials over 280 Brinell Performs best in rigid setups Point Angle  - 132 degree, (Series 5-8 :...

5/8" Dia., 6 Flute., 1-7/8" LOC, 0.015" Corner Rad, Chip Splitter V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1" Dia., 6 Flute., 1-1/2" LOC, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

15/32" Dia., 4 Flute., 1" LOC, Ball Nose, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1/8" Dia., 4 Flute., 3/8" LOC, 0.030" Corner Rad, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

11/32 Dia., 4 Flute., 13/16 LOC, V7 Plus A, Coated Carbide End Mill

V7PlusA For Stainless Steels, Mild Steels, Cast Iron, Low/Medium Hardness Materials Under Hrc40  Excellent material removal rates and surface finishes Unequal indexing for reduced chatter...

1" Dia., 3 Flute., 1-1/4" LOC, 3" OAL, 0.250" Corner Rad, ALU-Power HPC DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated Provides...

1" Dia., 3 Flute., 3-1/4" LOC, 0.190" Corner Rad, ALU-Power HPC DLC Coated Carbide End Mill

  Balanced cutting with less vibration.Ability to run at high speeds with less heat in aluminum.More efficient chip evacuation.Ability to counteract extreme radial forces.DLC Coated Provides...